Show Rmon Filter - Enterasys SecureStack C2 Configuration Manual

Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON channel entry 2:
C2(rw)->clear rmon channel 2

show rmon filter

Use this command to display one or more RMON filter entries.
Syntax
show rmon filter [index index | channel channel]
Parameters
index index |
channel channel
Defaults
If no options are specified, information for all filter entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display all RMON filter entries and channel information:
C2(rw)->show rmon filter
Index= 55508
----------------------------------------------------------
Data Offset
PktStatusMask
Owner
-----------------------------
Data
ff ff ff ff ff ff
-----------------------------
DataMask
ff ff ff ff ff ff
-----------------------------
DataNotMask
00 00 00 00 00 00
Specifies the channel entry to be cleared.
(Optional) Displays information about a specific filter entry, or about all
filters which belong to a specific channel.
Channel Index= 628
0 PktStatus
0 PktStatusNotMask
ETS,NAC-D
EntryStatus= valid
0
0
SecureStack C2 Configuration Guide 13-17
show rmon filter