Set Pwa Enhancedmode; Configuring Secure Shell (Ssh); Purpose; Commands - Enterasys SecureStack C2 Configuration Manual

set pwa enhancedmode

set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable PWA enhancedmode:
C2(su)->set pwa enhancedmode enable

Configuring Secure Shell (SSH)

Purpose

To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.

Commands

For information about...

show ssh status

set ssh
set ssh hostkey
show ssh status
Use this command to display the current status of SSH on the switch.
Syntax
show ssh status
18-68 Security Configuration
Enables or disables PWA enhancedmode.
Refer to page...
18-68
18-69
18-69