show ip pimsm interface
Examples
This example shows how to display PIM interface information.
.
C2(su)->router> show ip pimsm interface vlan 30
VLAN ID
IP Address
Subnet Mask
Mode
Hello Interval (secs)
CBSR Preference
CRP Preference
CBSR Hash Mask Length
Table
17‐9 provides an explanation of the show ip pimsm interface vlan command output.
Table 17-9 show ip pimsm interface vlan Output Details
Output
IP Address
Subnet Mask
Mode
Hello Interval
CBSR Preference
CRP Preference
CBSR Hash Mask
Length
This example shows how to display PIM interface statistics.
.
C2(su)->router> show ip pimsm interface stats all
Vlan ID
---------
6
7
8
30
Table
17‐10 provides an explanation of the show ip pimsm interface stats command output.
Table 17-10 show ip pimsm interface stats Output Detail
Output
IP Address
Subnet Mask
Designated Router
Neighbor Count
17-50 IPv4 Routing Protocol Configuration
30
192.168.30.1
255.255.255.0
enable
30 secs
-1
-1
30
What it displays
The IP address of the specified interface.
The Subnet Mask for the IP address of the PIM interface.
Indicates whether PIM-SM is enabled or disabled on the specified interface. This is a
configured value. By default it is disabled.
Indicates the frequency at which PIM hello messages are transmitted on this
interface. This is a configured value. By default, the value is 30 seconds
The preference value for the local interface as a candidate bootstrap router.
The preference value as a candidate rendezvous point on this interface.
The hash mask length to be advertised in bootstrap messages if this interface is
elected as the bootstrap router. The value is used in the hash algorithm for selecting
the RP for a particular group.
IP Address
Subnet Mask
---------------
---------------
192.168.6.2
255.255.255.0
192.168.7.1
255.255.255.0
192.168.8.1
255.255.255.0
192.168.30.1
255.255.255.0
What it displays
The IP Address that represents the PIM-SM interface.
The Subnet Mask of this PIM-SM interface.
IP Address of the Designated Router for this interface.
The number of neighbors on the PIM-SM interface.
Neighbor
Designated Router
-----------------
----------
0.0.0.0
192.168.7.1
0.0.0.0
192.168.30.2
count
0
0
0
1
Need help?
Do you have a question about the SecureStack C2 and is the answer not in the manual?
Questions and answers