Set Linkflap Threshold; Set Linkflap Downtime - Enterasys SecureStack C2 Configuration Manual

set linkflap threshold

Example
This example shows how to clear the link flap violation action on port
Syslog entry.
C2(rw)->clear linkflap action ge.1.4 gensyslogentry
set linkflap threshold
Use this command to set the link flap action trigger count.
Syntax
set linkflap threshold port-string threshold-value
Parameters
port‐string
threshold‐value
Defaults
None.
Mode
Switch mode, read‐write.
Example
This example shows how to set the link flap threshold on port
C2(rw)->set linkflap threshold ge.1.4 5

set linkflap downtime

Use this command to set the time interval (in seconds) one or more ports will be held down after a
link flap violation.
Syntax
set linkflap downtime port-string downtime-value
Parameters
port‐string
downtime‐value
Defaults
None.
Mode
Switch mode, read‐write.
5-26 Port Configuration
Specifies the port(s) on which to set the link flap action trigger count.
Specifies the number of link down transitions necessary to trigger the
link flap action. A minimum of 1 must be configured.
Specifies the port(s) on which to set the link flap downtime.
Specifies a downtime in seconds. A value of 0 will set the downtime to
forever.
.1.4 to generating a
ge
.1.4 to 5.
ge