Clear Nodealias Config - Enterasys SecureStack C2 Configuration Manual

clear nodealias config

clear nodealias config
Use this command to reset node alias state to enabled and clear the maximum entries value.
Syntax
clear nodealias config port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the node alias configuration on
C2(su)->clear nodealias config ge.1.3
12-34 Logging and Network Management
Specifies the port(s) on which to reset the node alias configuration.
:
.1.3
ge