Show Switch Stack-Ports - Enterasys SecureStack C2 Configuration Manual

show switch stack-ports

Parameters
switchindex
Defaults
None.
Mode
Switch command, read‐only.
Examples
This example shows how to display switch type information about all switches in the stack:
C2(ro)->show switch switchtype
SID
--- -------------------------------- ---- ---------
1 C2G124-24
2 C2K122-24
3 C2G124-48
4 C2G124-48P
5 C2H124-48
6 C2H124-48P
7 C2G134-24P
8 C2G170-24
This example shows how to display switch type information about SID1:
C2(ro)->show switch switchtype 1
Switch Type
Model Identifier
Switch Description
Management Preference
Expected Code Version
Supported Cards:
Slot
Card Index (CID)
Model Identifier
show switch stack-ports
Use this command to display various data flow and error counters on stack ports.
Syntax
show switch stack-ports [unit]
Parameters
unit
Defaults
None.
2-8 Configuring Switches in a Stack
(Optional) Specifies the switch index (SID) of the switch type to display.
Switch Model ID
(Optional) Specifies the switch unit ID, an integer ranging from 1 to 8.
Mgmt Code
Pref Version
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
0x56950200
C2G124-24
Enterasys Networks, Inc. C2 --
Model C2G124-24
1
0xa08245
0
1
C2G124-24