History Group Commands; Purpose; Commands; Show Rmon History - Enterasys SecureStack C2 Configuration Manual

Mode
Switch command, read‐write.
Example
This example shows how to delete RMON statistics entry 2:
C2(rw)->clear rmon stats 2

History Group Commands

Purpose

To display, configure, and clear RMON history properties and statistics.

Commands

For information about...

show rmon history

set rmon history
clear rmon history
show rmon history
Use this command to display RMON history properties and statistics. The RMON history group
records periodic statistical samples from a network.
Syntax
show rmon history [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, information about all RMON history entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display RMON history entries for Gigabit Ethernet port 1 in switch 1.
A control entry displays first, followed by actual entries corresponding to the control entry. In this
case, the default settings for entry owner, sampling interval, and maximum number of entries.
(buckets) have not been changed from their default values. For a description of the types of
statistics shown, refer to Table
:
(Optional) Displays RMON history entries for specific port(s).
13‐2.
History Group Commands
Refer to page...
13-5
13-6
13-7
SecureStack C2 Configuration Guide 13-5