Ip Igmp; Ip Igmp Enable - Enterasys SecureStack C2 Configuration Manual

ip igmp

ip igmp
Use this command to enable IGMP on the router. The no form of this command disables IGMP on
the router.
Syntax
ip igmp
no ip igmp
Parameters
None.
Defaults
None.
Mode
Global configuration: C2(su)‐>router(Config)#
Example
This example shows how to enable IGMP on the router:
C2(su)->router(Config)#ip igmp

ip igmp enable

Use this command to enable IGMP on an interface. The no form of this command disables IGMP
on an interface.
Syntax
ip igmp enable
no ip igmp enable
Parameters
None.
Defaults
None.
Mode
Interface configuration: C2(su)‐>router(Config‐if(Vlan 1))#
Example
This example shows how to enable IGMP on the VLAN 1 interface:
C2(su)->router(Config)#interface vlan 1
C2(su)->router(Config-if(Vlan 1))#ip igmp enable
11-10 IGMP Configuration