Creating And Naming Static Vlans; Purpose; Commands; Set Vlan - Enterasys SecureStack C2 Configuration Manual

Creating and Naming Static VLANs

Table 8-2 show vlan Output Details
Output
VLAN
NAME
Status
VLAN Type
Egress Ports
Forbidden Egress
Ports
Untagged Ports
Creating and Naming Static VLANs

Purpose

To create a new static VLAN, or to enable or disable existing VLAN(s).

Commands

For information about...

set vlan

set vlan name
clear vlan
clear vlan name
set vlan
Use this command to create a new static IEEE 802.1Q VLAN, or to enable or disable an existing
VLAN.
Syntax
set vlan {create | enable | disable} vlan-list
Parameters
create | enable |
disable
vlan‐list
Defaults
None.
8-4 802.1Q VLAN Configuration
What It Displays...
VLAN ID.
Name assigned to the VLAN.
Whether it is enabled or disabled.
Whether it is permanent (static) or dynamic.
Ports configured to transmit frames for this VLAN.
Ports prevented from transmitted frames for this VLAN.
Ports configured to transmit untagged frames for this VLAN.
Creates, enables or disables VLAN(s).
Specifies one or more VLAN IDs to be created, enabled or disabled.
Refer to page...
8-4
8-5
8-5
8-6