clear snmp notifyfilter
clear snmp notifyfilter
Use this command to delete an SNMP notify filter configuration.
Syntax
clear snmp notifyfilter profile subtree oid-or-mibobject
Parameters
profile
subtree oid‐or‐
mibobject
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the SNMP notify filter "pilot1":
C2(su)->clear snmp notifyfilter pilot1 subtree 1.3.6
show snmp notifyprofile
Use this command to display SNMP notify profile information. This associates target parameters
to an SNMP notify filter to determine who should not receive SNMP notifications.
Syntax
show snmp notifyprofile [profile] [targetparam targetparam] [volatile |
nonvolatile | read-only]
Parameters
profile
targetparam
targetparam
volatile |
nonvolatile | read‐
only
Defaults
If no parameters are specified, all notify profile information will be displayed.
Mode
Switch command, read‐only.
6-34 SNMP Configuration
Specifies an SNMP filter notify name to delete.
Specifies a MIB subtree ID containing the filter to be deleted.
(Optional) Displays a specific notify profile.
(Optional) Displays entries for a specific target parameter.
(Optional) Displays notify filter entries of a specific storage type.