Enterasys SecureStack C2 Configuration Manual page 604

Stackable switches

Hide thumbs Also See for SecureStack C2:

Table of Contents

ip access-group

ACLs must be applied per routing interface. An entry (rule) can be applied to inbound frames

This example shows how to apply access list 1 for all inbound frames on the VLAN 1 interface.

Through the definition of access list 1, only frames with a source address on the 192.5.34.0/24

network will be routed. All the frames with other source addresses received on the VLAN 1

interface are dropped:

C2(su)->router(Config)#access-list 1 permit 192.5.34.0 0.0.0.255

C2(su)->router(Config)#interface vlan 1

C2(su)->router(Config-if(Vlan 1))#ip access-group 1 in

18-80 Security Configuration