Copy; Delete - Enterasys SecureStack C2 Configuration Manual

copy

copy
Use this command to upload or download an image or a CLI configuration file.
Syntax
copy source destination
Parameters
source
destination
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to download an image via TFTP:
C2(su)->copy tftp://10.1.192.34/version01000 system:image
This example shows how to download a configuration file to the configs directory:
C2(su)->copy tftp://10.1.192.1/Jan1_2004.cfg configs/Jan1_2004.cfg

delete

Use this command to remove an image or a CLI configuration file from the switch.
Syntax
delete filename
Parameters
filename
Defaults
None.
Mode
Switch command, read‐write.
Usage
Use the dir command (page 3‐38) to display current image and configuration file names.
3-42 Basic Configuration
Specifies location and name of the source file to copy. Options are a local file
path in the configs directory, or the URL of a TFTP server.
Specifies location and name of the destination where the file will be copied.
Options are a slot location and file name, or the URL of a TFTP server.
Specifies the local path name to the file. Valid directories are /images and
/configs.44.