Configuring Snmp Notification Parameters; About Snmp Notify Filters; Show Newaddrtrap - Enterasys SecureStack C2 Configuration Manual

Configuring SNMP Notification Parameters

Configuring SNMP Notification Parameters

About SNMP Notify Filters

Profiles indicating which targets should not receive SNMP notification messages are kept in the
NotifyFilter table. If this table is empty, meaning that no filtering is associated with any SNMP
target, then no filtering will take place. "Traps" or "informs" notifications will be sent to all
destinations in the SNMP targetAddrTable that have tags matching those found in the
NotifyTable.
When the NotifyFilter table contains profile entries, the SNMP agent will find any filter profile
name that corresponds to the target parameter name contained in an outgoing notification
message. It will then apply the appropriate subtree‐specific filter when generating notification
messages.
Purpose
To configure SNMP notification parameters and optional filters. Notifications are entities which
handle the generation of SNMP v1 and v2 "traps" or SNMP v3 "informs" messages to select
management targets. Optional notification filters identify which targets should not receive
notifications. For a sample SNMP trap configuration showing how SNMP notification parameters
are associated with security and authorization criteria (target parameters) and mapped to a
management target address, refer to "Creating a Basic SNMP Trap Configuration" on page 6‐36.
Commands
For information about...

show newaddrtrap

set newaddrtrap
show snmp notify
set snmp notify
clear snmp notify
show snmp notifyfilter
set snmp notifyfilter
clear snmp notifyfilter
show snmp notifyprofile
set snmp notifyprofile
clear snmp notifyprofile
show newaddrtrap
Use this command to display the global and port‐specific status of the SNMP new MAC addresses
trap function.
Syntax
show newaddrtrap [port-string]
6-28 SNMP Configuration
Refer to page...
6-28
6-29
6-30
6-31
6-32
6-32
6-33
6-34
6-34
6-35
6-35