Set Cos Port-Config - Enterasys SecureStack C2 Configuration Manual

set cos port-config

Mode
Switch command, read‐only.
Example
This example shows how to show all CoS settings:
C2(su)->show cos settings
CoS Index Priority
--------- ---------- ------- -----
0
1
2
3
4
5
6
7
set cos port-config
Use this command to create a port group for inbound rate limiting and add or remove ports from
the group.
Syntax
set cos port-config irl group-type-index [name name] [ports port-list] [append] |
[clear]
Parameters
irl
group‐type‐index
name name
ports port‐list
append
clear
Defaults
None.
Mode
Switch command, read‐write.
9-22 Policy Classification Configuration
ToS IRL
0 * *
1 * *
2 * *
3 * *
4 * *
5 * *
6 * *
7 * *
Specifies that this is an inbound rate limiting (IRL) port group.
Specifies an inbound rate limiting port group/type index. Valid entries
are in the form of group#.port‐type.
Valid values for group# can range from 0 to 7. Valid values for port‐type
can range from 0 to 1, although only port type 0 is currently supported.
For example, port group 3 would be specified as 3.0.
(Optional) User defined name for the group.
(Optional) Ports assigned to the group. All ports must be of the same port
type (Fast Ethernet, Gigabit Ethernet).
(Optional) Append (add) the ports to the ports that are already in the
group.
(Optional) Clear the given ports from those assigned to the group.