Set Pwa Guestname; Clear Pwa Guestname - Enterasys SecureStack C2 Configuration Manual

Example
This example shows how to set a the PWA protocol to CHAP:
C2(su)->set pwa protocol chap

set pwa guestname

Use this command to set a guest user name for PWA networking. PWA will use this name to grant
network access to guests without established login names and passwords.
Syntax
set pwa guestname name
Parameters
name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the PWA guest user name to "guestuser":
C2(su)->set pwa guestname guestuser

clear pwa guestname

Use this command to clear the PWA guest user name.
Syntax
clear pwa guestname
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the PWA guest user name
C2(su)->clear pwa guestname
Specifies a guest user name.
set pwa guestname
SecureStack C2 Configuration Guide 18-63