Clear Port Lacp - Enterasys SecureStack C2 Configuration Manual

Mode
Switch command, read‐write.
Usage
LACP commands and parameters beginning with an "a" (such as aadminkey) set actor values.
Corresponding commands and parameters beginning with a "p" (such as padminkey) set
corresponding partner values. Actor refers to the local device participating in LACP negotiation,
while partner refers to its remote device partner at the other end of the negotiation. Actors and
partners maintain current status of the other via LACPDUs containing information about their
ports' LACP status and operational state.
Example
This example shows how to set the actor admin key to 3555 for port
C2(su)->set port lacp ge.3.16 aadminkey 3555

clear port lacp

Use this command to clear link aggregation settings for one or more ports.
Syntax
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}
Parameters
port port‐string
aadminkey
aportpri
asyspri
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
padminsyspri
padminsysid
padminkey
padminportpri
padminport
Specifies the physical port(s) on which LACP settings will be cleared. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 5‐2.
Clears a port's actor admin key.
Clears a port's actor port priority.
Clears the port's actor system priority.
Clears a port's specific actor admin state, or all actor admin state(s). For
descriptions of specific states, refer to the set port lacp command ("set
port lacp" on page 5‐43).
Clears the port's default partner priority value.
Clears the port's default partner system ID.
Clears the port's default partner admin key.
Clears the port's default partner port priority.
Deletes a partner port from the LACP configuration.
.3.16:
ge
SecureStack C2 Configuration Guide 5-45
clear port lacp