Show Ip Pimsm Neighbor; Show Ip Pimsm Rp; Show Ip Pimsm Neighbor Output Detail - Enterasys SecureStack C2 Configuration Manual

show ip pimsm neighbor

Display the router's PIM neighbors.
Syntax
show ip pimsm neighbor [vlan-id]
Parameters
vlan‐id
Mode
Any router mode.
Defaults
If the VLAN id is omitted, all neighbors off all interfaces will be displayed.
Example
This example shows how to display PIM information:
C2(su)->router> show ip pimsm neighbor
Vlan ID
---------
30
6
Table 17‐11 provides an explanation of the command output.
Table 17-11 show ip pimsm neighbor Output Detail
Output
Vlan ID
IP Address
Up Time
Expiry Time

show ip pimsm rp

This command displays the PIM information for candidate Rendezvous Points (RPs) for all IP
multicast groups or for a specific group address. The information in the table is displayed for each
IP multicast group.
Syntax
show ip pimsm rp {group-address group-mask | all | candidate}
(Optional) Display all neighbors discovered on a specific Interface.
NEIGHBOR TABLE
IP Address Up Time
(hh:mm:ss)
---------------- ----------
192.168.30.2 01:36:41
192.168.6.1 01:36:41
What it displays
VLAN id of the interface.
The IP Address of the neighbor on an interface
The time since this neighbor has become active on this interface.
The expiry time of the neighbor on this interface.
Expiry Time
(hh:mm:ss)
------------
00:01:25
00:01:25
SecureStack C2 Configuration Guide 17-51
show ip pimsm neighbor