clear port ratelimit
Example
This example shows how to:
•
globally enable rate limiting
•
configure rate limiting for inbound traffic on port
125 KBps:
C2(rw)->set port ratelimit enable
C2(rw)->set port ratelimit ge.2.1 5 125 enable inbound
clear port ratelimit
Use this command to clear rate limiting parameters for one or more ports.
Syntax
clear port ratelimit port-string [index]
Parameters
port‐string
index
Defaults
If not specified, all index entries will be reset.
Mode
Switch command, read‐write.
Example
This example shows how to clear all rate limitingparameters on port
C2(su)->clear port ratelimit ge.2.1
10-12 Port Priority and Rate Limiting Configuration
Specifies the port(s) on which to clear rate limiting. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 5‐2.
(Optional) Specifies the associated resource index to be reset.
.2.1, index 1, priority 5, to a threshold of
ge
.2.1.
ge