Commands; Show Port Ratelimit; Show Port Ratelimit Output Details - Enterasys SecureStack C2 Configuration Manual

show port ratelimit

Commands

.
For information about...
show port ratelimit
set port ratelimit
clear port ratelimit
show port ratelimit
Use this command to show the traffic rate limiting configuration on one or more ports.
Syntax
show port ratelimit [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, rate limiting information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display the current rate limiting information for
C2(su)->show port ratelimit ge.2.1
Global Ratelimiting status is disabled.
Port
Number
-----------
ge.2.1
ge.2.1
ge.2.1
ge.2.1
ge.2.1
ge.2.1
ge.2.1
ge.2.1
Table 10‐1 provides an explanation of the command output.
Table 10-1 show port ratelimit Output Details
Output
Port Number
10-10 Port Priority and Rate Limiting Configuration
(Optional) Displays rate limiting information for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 5‐2.
Threshold
Index (kB/s)
----- --------- ------------
1 64
2 64
3 64
4 64
5 64
6 64
7 64
8 64
What It Displays...
Port designation. For a detailed description of possible port-string
values, refer to
Action Direction
---------
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
discard inbound
"Port String Syntax Used in the
Refer to page...
10-10
10-11
10-12
.2.1:
ge
Priority
List Status
----------- --------
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
0 disabled
CLI" on page 5-2.