Show Ip Pimsm Interface; Show Ip Pimsm Componenettable Output Detail - Enterasys SecureStack C2 Configuration Manual

Mode
Any router mode.
Example
This example shows how to display PIM router information:
C2(su)->router> show ip pimsm componenttable
Component
Index
----------
1
Table 17‐8 provides an explanation of the command output.
Table 17-8 show ip pimsm componenettable Output Detail
Output
Component Index
Component BSR
Address
Component BSR
Expiry Time
Component CRP
Hold Time

show ip pimsm interface

This command displays PIM‐SM status of the router interfaces. With the stats parameter, this
command displays statistical information for PIM‐SM on the specified interface.
Syntax
show ip pimsm interface {vlan vlan-id | stats {vlan-id | all}}
Parameters
vlan vlan‐id
stats
vlan‐id | all
Defaults
None.
Mode
Any router mode.
COMPONENT TABLE
Component Component
BSR Address BSR Expiry Time CRP Hold Time
(hh:mm:ss)
--------------- --------------- -------------
192.168.30.2 00:02:10
What it displays
This field displays a number which uniquely identifies the component.
This field displays the IP address of the bootstrap router (BSR) for the local PIM
region.
This field displays the minimum time remaining before the BSR in the local domain
will be declared down.
This field displays the hold time of the component when it is a candidate rendezvous
point.
Display PIM‐SM information for the specified IP interface enabled for
PIM.
Display PIM‐SM interface statistics.
Display statistics for a specific VLAN or all VLANs.
Component
(hh:mm:ss)
00:00:00
SecureStack C2 Configuration Guide 17-49
show ip pimsm interface