Commands; Show Host Vlan; Set Host Vlan - Enterasys SecureStack C2 Configuration Manual

Commands.

For information about...

show host vlan

set host vlan

clear host vlan
show host vlan
Use this command to display the current host VLAN.
Syntax
show host vlan
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the host VLAN:
C2(su)->show host vlan
Host vlan is 7.
set host vlan
Use this command to assign host status to a VLAN.
Syntax
set host vlan vlan-id
Parameters
vlan‐id
Defaults
None.
Note: The host port is the management entity of the device. Refer to
Management VLAN" on page 8-1 for more information.
Specifies the number of the VLAN to set as the host VLAN.
show host vlan
"Creating a Secure
Refer to page...
8-17
8-17
8-18
SecureStack C2 Configuration Guide 8-17