Show Maclock; Show Maclock Output Details - Enterasys SecureStack C2 Configuration Manual

For information about...
clear maclock
set maclock static
clear maclock static
set maclock firstarrival
clear maclock firstarrival
set maclock agefirstarrival
clear maclock agefirstarrival
set maclock move
set maclock trap

show maclock

Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for
C2(su)->show maclock ge.1.1
MAC locking is globally enabled
Port
Number
-------
ge.1.1
Table 18‐6 provides an explanation of the command output.
Table 18-6 show maclock Output Details
Output
Port Number
(Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 5‐2.
Port Trap Aging
Status Status Status
------- -------- -------
enabled disabled enabled
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
ge
Max Static Max FirstArrival
Allocated Allocated
---------- ---------------
20 1
CLI" on page 5-2.
SecureStack C2 Configuration Guide 18-47
show maclock
Refer to page...
18-51
18-52
18-52
18-53
18-53
18-54
18-55
18-55
18-56
.1.1.
Last Violating
MAC Address
---------------
00:a0:c9:39:5c:b4