Clear Port Protected; Set Port Protected Name - Enterasys SecureStack C2 Configuration Manual

clear port protected

Example
This example shows how to display information about all protected ports:
C2(ro)->show port protected
Group id
----------------------
1
1
1
clear port protected
Use this command to remove a port or group from protected mode.
Syntax
clear port protected [port-string] | [group-id]
Parameters
port‐string
group‐id
Defaults
If no parameters are entered, all protected ports and groups are cleared.
Mode
Switch command, read‐write.
Example
This example shows how to clear protected ports
C2(rw)->clear port protected ge.1.1-3

set port protected name

Use this command to assign a name to a protected port group id.
Syntax
set port protected name group-id name
Parameters
group‐id
name
Defaults
None.
5-48 Port Configuration
Port
ge.1.1
ge.1.2
ge.1.3
(Optional) Specifies the port or ports to remove from protected mode.
(Optional) Specifies the id of the group to remove from protected mode.
Id can range from 0 to 2.
Specifies the id of this group. Id can range from 0 to 2.
Specifies a name for the group. The name can be up to 32 characters in
length.
.1.1 through .1.3:
ge ge