Set Rmon Event Properties; Show Rmon Event Output Details - Enterasys SecureStack C2 Configuration Manual

set rmon event properties

Syntax
show rmon event [index]
Parameters
index
Defaults
If index is not specified, information about all RMON entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display RMON event entry 3:
C2(rw)->show rmon event 3
Index 3
----------------
Owner
Status
Description
Type
Community
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 13‐3 provides an explanation of the command output.
Table 13-3 show rmon event Output Details
Output
Index
Owner
Status
Description
Type
Community
Last Time Sent
set rmon event properties
Use this command to configure an RMON event entry, or to create a new event entry with an
unused event index number.
Syntax
set rmon event properties index [description description] [type {none | log | trap
| both}] [community community] [owner owner]
13-12 RMON Configuration
(Optional) Displays RMON properties and log entries for a specific entry
index ID.
= Manager
= valid
= STP Topology change
= log-and-trap
= public
What It Displays...
Index number for this event entry.
Text string identifying who configured this entry.
Whether this event entry is enabled (valid) or disabled.
Text string description of this event.
Whether the event notification will be a log entry, and SNMP trap, both, or none.
SNMP community name if message type is set to trap.
When an event notification matching this entry was sent.