Port Configuration Summary; C2H124-48 And C2H124-48P Switch Ports; C2G124-24, C2G124-48, And C2G124-48P Switch Ports - Enterasys SecureStack C2 Configuration Manual

This chapter describes the Port Configuration set of commands and how to use them.
For information about...

Port Configuration Summary

Reviewing Port Status
Disabling / Enabling and Naming Ports
Setting Speed and Duplex Mode
Enabling / Disabling Jumbo Frame Support
Setting Auto-Negotiation and Advertised Ability
Setting Flow Control
Setting Port Link Traps and Link Flap Detection
Configuring Broadcast Suppression
Port Mirroring
Link Aggregation Control Protocol (LACP)
Configuring Protected Ports
Port Configuration Summary

C2H124-48 and C2H124-48P Switch Ports

The C2H124‐48 stackable devices provide the following types of front panel connections:
• Forty‐eight fixed RJ45 10/100 Mbps copper Fast Ethernet ports
• Four SFP slots that provide the option of installing Small Form Pluggable (SFP) Mini‐GBICs
for 1000BASE‐T compliant copper connections or 1000BASE‐SX\LX\ELX fiber‐optic
connections

C2G124-24, C2G124-48, and C2G124-48P Switch Ports

The C2G124‐24, C2G124‐48 and C2G124‐48P stackable devices provide the following types of
switch port connections:
• Twenty‐four or forty‐eight RJ45 10/100/1000 Mbps 1000BASE‐T Fast Ethernet copper ports
Port Configuration
Refer to page...
SecureStack C2 Configuration Guide 5-1
5
5-1
5-3
5-7
5-9
5-12
5-14
5-17
5-19
5-28
5-30
5-32
5-46