Show Port Alias; Set Port Alias - Enterasys SecureStack C2 Configuration Manual

show port alias

Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable
C2(su)->set port enable ge.1.3
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display alias information for ports 1‐3 on slot 3:
C2(rw)->show port alias ge.3.1-3
Port
Port
Port

set port alias

Use this command to assign an alias name to a port.
Syntax
set port alias port-string [name]
5-8 Port Configuration
Specifies the port(s) to enable. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 5‐2.
(Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 5‐2.
ge.3.1 user
ge.3.2 user
ge.3.3 Admin
.1.3:
ge