Example
This example shows how to set the link flap downtime on port
C2(rw)->set linkflap downtime ge.1.4 5000
clear linkflap down
Use this command to toggle link flap disabled ports to operational.
Syntax
clear linkflap down [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, all ports disabled by a link flap violation will be made operational.
Mode
Switch mode, read‐write.
Example
This example shows how to make disabled port
C2(rw)->clear linkflap down ge.1.4
clear linkflap
Use this command to clear all link flap options and / or statistics on one or more ports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
all | stats
parameter
threshold | interval |
downtime | all
port‐string
Defaults
If port‐string is not specified, settings and/or statistics will be cleared on all ports.
Mode
Switch mode, read‐write.
(Optional) Specifies the ports to make operational.
ge
Clears all options and statistics, or clears only statistics.
Clears link flap parameters.
Clears link flap threshold, interval, downtime or all parameters.
(Optional unless parameter is specified) Specifies the port(s) on which
to clear settings.
.1.4 to 5000 seconds.
ge
.1.4 operational.
SecureStack C2 Configuration Guide 5-27
clear linkflap down