Show Ip Arp - Enterasys SecureStack C2 Configuration Manual

show ip arp

show ip arp
Use this command to display entries in the ARP (Address Resolution Protocol) table. ARP
converts an IP address into a physical address.
Syntax
show ip arp [ip-address] [vlan vlan-id] [output-modifier]
Parameters
ip‐address
vlan vlan‐id
output‐modifier
Defaults
If no parameters are specified, all entries in the ARP cache will be displayed.
Mode
Any router mode.
Example
This example shows how to use the show ip arp command:
C2(su)->router#show ip arp
Protocol
------------------------------------------------------------------------------
Internet
Internet
Internet
C2(su)->router#show ip arp 134.141.235.165
Protocol
------------------------------------------------------------------------------
Internet
C2(su)->router#show ip arp vlan 2
Protocol
------------------------------------------------------------------------------
Internet
Table 16‐2 provides an explanation of the command output.
16-8 IP Configuration
(Optional) Displays ARP entries related to a specific IP address.
(Optional) Displays only ARP entries learned through a specific VLAN
interface. This VLAN must be configured for IP routing as described in
"Pre‐Routing Configuration Tasks" on page 15‐1.
(Optional) Displays ARP entries within a specific range. Options are:
– | begin ip‐address — Displays only ARP entries that begin with the
specified IP address.
– | exclude ip‐address — Excludes ARP entries matching the specified
IP address.
– | include ip‐address — Includes ARP entries matching the specified
IP address.
Address Age (min) Hardware Addr
134.141.235.251
134.141.235.165
134.141.235.167
Address Age (min)
134.141.235.165
Address Age (min) Hardware Addr Type
134.141.235.251
0 0003.4712.7a99
- 0002.1664.a5b3
4 00d0.cf00.4b74
Hardware Addr Type
- 0002.1664.a5b3
0 0003.4712.7a99 ARPA
Type Interface
ARPA Vlan1
ARPA Vlan1
ARPA Vlan2
Interface
ARPA Vlan2
Interface
Vlan2