Clear Rmon Capture - Enterasys SecureStack C2 Configuration Manual

action lock
slice slice
loadsize loadsize
offset offset
asksize asksize
owner
Defaults
If not specified, action defaults to lock.
If not specified, offset defaults to 0.
If not specified, asksize defaults to ‐1 (which will request as many octets as possible).
If slice is not specified, 1518 will be applied.
If loadsize is not specified, 100 will be applied.
If owner is not specified, it will be set to monitor.
Mode
Switch command, read‐write.
Example
This example shows how to create RMON capture entry 1 to "listen" on channel 628:
C2(rw)->set rmon capture 1 628

clear rmon capture

Use this command to clears an RMON capture entry.
Syntax
clear rmon capture index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
(Optional) Specifies the action of the buffer when it is full as:
• lock ‐ Packets will cease to be accepted
(Optional) Specifies the maximum octets from each packet to be saved in
a buffer. Currently, the only value allowed is 1518.
(Optional) Specifies the maximum octets from each packet to be
downloaded from the buffer. The default is 100.
(Optional) Specifies the first octet from each packet that will be retrieved.
(Optional) Specifies the requested maximum octets to be saved in this
buffer. Currently, the only value accepted is ‐1, which requests as many
octets as possible.
(Optional) Specifies the name of the entity that configured this entry.
Specifies the capture entry to be cleared.
clear rmon capture
SecureStack C2 Configuration Guide 13-21