Set Prompt; Show Banner Motd - Enterasys SecureStack C2 Configuration Manual

Example
This example shows how to clear the daylight savings time configuration:
C2(su)->clear summertime

set prompt

Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
prompt_string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the command prompt to Switch 1:
C2(su)->set prompt "Switch 1"
Switch 1(su)->

show banner motd

Use this command to show the banner message of the day that will display at session login.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.
SecureStack C2 Configuration Guide 3-19
set prompt