Show Ip Pimsm Rphash; Show Ip Pimsm Staticrp - Enterasys SecureStack C2 Configuration Manual

show ip pimsm rphash

Displays the Rendezvous Point router that will be selected from the set of active RP routers. The
RP router, for the group, is selected by using the hash algorithm defined in RFC 2362.
Syntax
show ip pimsm rphash group-address
Parameters
group‐address
Defaults
None.
Mode
Any router mode.
Example
This example shows how to display RP that will be selected for group address 224.0.0.0:
C2(su)->router> show ip pimsm rphash 224.0.0.0
192.168.129.223

show ip pimsm staticrp

Display the PIM‐SM static Rendezvous Point information.
Syntax
show ip pimsm staticrp
Parameters
None.
Mode
Any router mode.
Defaults
None.
Example
This example shows how to display PIM information.
C2(su)->router# show ip pimsm staticrp
Address
--------------- --------------- ---------------
123.231.111.121 234.0.0.0
192.168.129.223 224.0.0.0
The Group Address for the RP.
STATIC RP TABLE
Group Address
255.0.0.0
240.0.0.0
Group Mask
SecureStack C2 Configuration Guide 17-53
show ip pimsm rphash