System:communicate:ethernet:description; System:communicate:ethernet:whitelist:enable - Keysight N774 C Series Programming Manual

3 Instrument Setup and Status
Parameters: Address String
Response: None
Example: :syst:comm:eth:ntp:serv "pool.ntp.org"
Command:

:SYSTem:COMMunicate:ETHernet:DESCription?

Syntax: :SYSTem:COMMunicate:ETHernet:DESCription?
Description: Get the desired mDNS service name.
Parameters: None
Response: Quoted string of up to 260 characters
Example: :syst:comm:eth:desc? -> "Keysight N7745C - 42321"
Command: :SYSTem:COMMunicate:ETHernet:DESCription
Syntax: :SYSTem:COMMunicate:ETHernet:DESCription
Description: Set the desired mDNS service name.
Parameters: Quoted string of up to 260 characters
Response: None
Example: :syst:comm:eth:desc "Keysight N7745C - 42321"
Command:

:SYSTem:COMMunicate:ETHernet:WHITEList:ENABle?

Syntax: :SYSTem:COMMunicate:ETHernet:WHITEList:ENABle?
Description: Get the deive access IP whitelist status
Parameters: None
Response: Boolean (0 | 1)
Example: :syst:comm:eth:whitel:enab? +0
54 Keysight N774xC Series Multiport Power Meter Programming Guide