Lan Settings - Keysight N9923A FieldFox User Manual

 Use the ▲|▼ arrows or numeric keypad to edit that field.
 Press
 Press

LAN Settings

Configure the LAN settings to be used to communicate with the Data Link Software.
Learn more at:
LAN Settings
How to configure the LAN settings
The first three 'Current...' settings can NOT be edited.
 Press System 7.
 Then
 Then LAN.
 Use the ▲|▼ arrows to select one of the following, then press Edit.
NOTE To make the LAN settings persist after power up, toggle Apply Settings to Now then
back to Power Up. You should see a message indicating that the LANconfig file was
saved.
System Settings
or when the edits are complete.
Cancel Done
to exit the Date and Time settings. The readout in the upper-right
Done
corner of the FieldFox screen will update accordingly.
www.keysight.com/find/fieldfoxsupport
System Configuration.
Hostname Change the name that can be used to address the FieldFox if your
o
server supports this feature. The default hostname is generated automatically.
Obtain IP Choose from:
o
DHCP - IP Address is assigned dynamically. If your server supports this
o
feature, the IP Address for the FieldFox is assigned each time it is started.
Static - Set the IP Address manually. The Address remains until you change it.
o
Static IP Address - Enter the IP Address – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Subnet Mask - Enter the Subnet Mask – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Gateway - Enter the Static Gateway – including periods - in the format
o
nnn.nnn.nnn.nnn
Apply Settings Choose from:
o
Power Up The above settings take effect when the FieldFox is started.
o
Now The above settings take effect immediately.
o
143