Authorization and Privilege Commands
To set command line authorization and privilege levels, use the following commands.
authorization
Apply an authorization method list to terminal lines.
Z9500
Syntax
authorization {exec | commands {level | role role-name}}
method-list
Parameters
exec
commands
{level | role
role-name}
method-list
Defaults
none
Command
LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.11.1
8.3.19.0
8.3.7.0
7.6.1.0
7.5.1.0
6.3.1.0
1558
Enter the keyword exec to apply an EXEC level authorization
method list.
Enter the keyword commands followed by either a privilege
level for accounting of commands executed at that privilege
level, or enter the keyword role then the role name for
authorization of commands executed by a user with that
user role.
Enter a method list that you defined using the aaa
accounting exec or aaa accounting commands.
Description
Added support for roles on the Z9500.
Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security