Show Cpu Traffic Qos - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show cpu traffic qos

Use the show cpu traffic qos command in user EXEC mode to display the QoS marking values for
CPU-generated traffic.
Syntax Description This command has no arguments or keywords.
Defaults
Displays the QoS marking values for all CPU-generated traffic.
Command Modes
User EXEC
Command History Release
12.2(52)SE
Examples
The following is sample output from the show cpu traffic qos command:
CPU QoS configuration:
Switch(config)# cpu traffic qos cos 2
Switch(config)# cpu traffic qos dscp 40
Show command:
Switch> show cpu traffic qos
QOS - CPU Generated Traffic
---------------------------
Set parameter-type
----------------------------------------------
Cos
DSCP
Precedence
Related Commands Command
cpu traffic qos cos
cpu traffic qos dscp
cpu traffic qos
precedence
mls qos map
show mls qos maps
show running-config
OL-9645-10
show cpu traffic qos
Modification
This command was introduced.
trust
dscp-mutation map1
Default
Description
Configures the CoS value for CPU-generated traffic.
Configures the DSCP value for CPU-generated traffic.
Configures the precedence for CPU-generated traffic.
Configures a global map to set CoS, DSCP, and precedence values for
CPU-generated traffic.
Displays information for all global maps.
Displays the configured global maps and CPU traffic QoS settings.
Catalyst 3750 Metro Switch Command Reference
show cpu traffic qos
2-447