Cdp Log Mismatch Native; Cdp Log Mismatch Voip - Cisco Sx350 Cli Manual

8
213
switchxxxxxx(config-if)#
8.7

cdp log mismatch native

To enable validating that the native VLAN received in a CDP packet matches the
actual native VLAN of the port and generation the SYSLOG VLAN native mismatch
messages if they do not match, use the cdp log mismatch native Global and
Interface Configuration mode command in Global Configuration mode and
Interface (Ethernet) Configuration mode. To disable the generation of the SYSLOG
messages, use the no format of the CLI command.
Syntax
cdp log mismatch native
no cdp log mismatch native
Parameters
N/A
Default Configuration
The switch reports native VLAN mismatches from all ports.
Command Mode
Global Configuration mode
Interface (Ethernet) Configuration mode
Example
switchxxxxxx(config)#
switchxxxxxx(config-if)#
8.8

cdp log mismatch voip

To enable validating that the VoIP status of the port received in a CDP packet
matches its actual configuration and generation the SYSLOG voip mismatch
messages if they do not match, use the cdp log mismatch voip Global and
Interface Configuration mode command in Global Configuration mode and
cdp log mismatch duplex
interface gi11
cdp log mismatch native
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
CDP Commands