Eigrp Log-Neighbor-Changes - Cisco Nexus 3548 Command Reference Manual

eigrp log-neighbor-changes

eigrp log-neighbor-changes
To enable the logging of changes in Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor
adjacencies, use the eigrp log-neighbor-changes command. To disable the logging of changes in EIGRP
neighbor adjacencies, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Adjacency changes are logged.
Command Modes Address-family configuration mode
Router configuration mode
Router VRF configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Base Services license.
Examples
This example shows how to enable logging of neighbor changes for EIGRP process 209:
switch# configure terminal
switch(config)# router eigrp 209
switch(config-router)# eigrp log-neighbor-changes
switch(config-router)#
Related Commands Command
log-neighbor-changes
log-neighbor-warnings Enables logging of EIGRP neighbor warnings.
log-adjacency-changes Enables logging of EIGRP adjacency state changes.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
120
eigrp log-neighbor-changes
no eigrp log-neighbor-changes
Modification
This command was introduced.
Description
Enables logging of EIGRP neighbor changes.
Chapter Unicast Routing Commands
OL-27852-01