Ip Igmp Snooping Vlan Mrouter Interface - Cisco 300 Series Cli Manual

21
435
Default Configuration
Learning pim-dvmrp is enabled.
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports are learned according to:
•
Queries received on the port
•
PIM/PIMv2 received on the port
•
DVMRP received on the port
•
MRDISC received on the port
•
MOSPF received on the port
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 mrouter learn pim-dvmrp

21.4 ip igmp snooping vlan mrouter interface

To define a port that is connected to a Multicast router port, use the ip igmp
snooping mrouter interface command in Global Configuration mode. To return to
the default, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
•
vlan-id
—Specifies the VLAN.
•
interface-list —Specifies the list of interfaces. The interfaces can be one of
the following types: Ethernet port or Port-channel.
vlan-id
mrouter interface i
vlan-id
mrouter interface
OL-32830-01 Command Line Interface Reference Guide
IGMP Snooping Commands
nterface-list
interface-list