Storage/Control I/O Module; General; Specifications - Cisco VCO/4K Mechanical Assemblies

Hide thumbs Also See for VCO/4K:

Manual (8 pages)

Table Of Contents

Table of Contents

1.0 GENERAL

The Storage/Control I/O Module performs two functions: to connect outside interfaces to the

system controller and to house the hard disk drive. It plugs into the back of the VCO/4K system

and provides the I/O interfaces for system peripheral devices and host communication links

using four serial ports, one Ethernet port, one printer port and one SCSI connector. Figure 1 is

an illustration of the front panel of the Storage/Control I/O Module.

Physical interfaces to host computers and peripheral devices are provided on the front panel of

the Storage/Control I/O Module. Two serial ports are available for SIO host links, and another

two are dedicated to supporting the local system administration console and a remote

maintenance modem. An Ethernet Transceiver interface and parallel printer connector are

also located on the Storage/Control I/O Module.

2.0 SPECIFICATIONS

Part Number:

Interfaces:

Power Requirements:

Hard Disk Drive

Ethernet

RS232

Total Current

Total Power

Operating Temperature:

Relative Humidity:

Physical Dimensions:

Technical Description