Show Interfaces Counters - Cisco Catalyst 3550 Command Reference Manual

show interfaces counters

show interfaces counters
Use the show interfaces counters privileged EXEC command to display various counters for the switch
or for a specific interface.
Syntax Description interface-id
vlan vlan-id
broadcast
errors
multicast
trunk
unicast
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the module keyword is not supported.
Note
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
If you do not enter any keywords, all counters for all interfaces are included.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3550 Multilayer Switch Command Reference
2-284
show interfaces [interface-id | vlan vlan-id] counters [broadcast | errors | multicast | trunk |
unicast] [ | {begin | exclude | include} expression]
(Optional) ID of the physical interface, including type and slot and port
number.
(Optional) VLAN number of the management VLAN. The range is 1 to 4094.
(Optional) Display discarded broadcast traffic.
(Optional) Display error counters.
(Optional) Display discarded multicast traffic.
(Optional) Display trunk counters.
(Optional) Display discarded unicast traffic.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Chapter 2 Cisco IOS Commands
78-11195-09