Dot1X Timeout Quiet-Period - Cisco Small Business 200 Series User Manual

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
show dot1x

dot1x timeout quiet-period

Use this command to set the number of seconds that the switch remains in the
quiet state following a failed authentication exchange (when for example, the client
provides an invalid password). To return to the default setting, use the no form of
this command.
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
Syntax Descriptions
Parameter
seconds
Default
seconds—60
Command Modes
Interface Config
Usage Guidelines
During the quiet period, the switch does not accept or initiate any authentication
requests. Change the default value of this command only to adjust for unusual
circumstances, such as unreliable links or specific behavioral problems with
certain clients and authentication servers. To provide a faster response time to the
user, enter a smaller number than the default.
Description
Shows a summary of the global 802. 1 X configuration,
summary information of the 802. 1 X configuration for a
specified port or all ports, the detailed 802. 1 X
configuration for a specified port, and the 802. 1 X statistics
for a specified port.
Description
The time that the switch remains in the quiet state
following a failed authentication exchange. The range is 0–
65535 seconds.
8
351