Web Server Commands; Ip Https Certificate - Cisco 300 Series Cli Manual

Web Server Commands

OL-32830-01 Command Line Interface Reference Guide
1

58.1 ip https certificate

To configure the active certificate for HTTPS, use the ip https certificate Global
Configuration mode command. To restore the default configuration, use the no
form of this command.
Syntax
number
ip https certificate
no ip https certificate
Parameters
number—Specifies the certificate number. (Range: 1–2)
Default Configuration
The default certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
First, use crypto certificate generate
Then use this command to specify which is the active certificate.
Example
The following example configures the active certificate for HTTPS.
switchxxxxxx(config)#
to generate one or two HTTPS certificates.
ip https certificate 2
58
1110