Specifying The Nam Ip Configuration And Enabling The Web Server - Cisco Nexus 7000 Hardware Installation And Reference Manual

7000 series
Hide thumbs Also See for Nexus 7000:
Table of Contents

Advertisement

Installing a NAM Module
6.
7.
DETAILED STEPS
Command
Step 1
config t
Example:
switch# config t
switch(config)#
Step 2
monitor session ID_number
Example:
switch(config)# monitor session 1
switch(config-monitor)#
Step 3
switch_ip_address int interface
Example:
switch(config-monitor)# 10.10.10.10 int e4/1 rx
switch(config-monitor)#
Step 4
nam_ip_address interface port-channel
port-channel_number
Example:
switch(config-monitor)# 11.11.11.11 interface
port-channel 3
Step 5
no rate limit
Example:
switch(config-monitor)# no rate limit
switch(config-monitor)#
Step 6
no shutdown
Example:
switch(config-monitor)# no shutdown
switch(config-monitor)#
Step 7
exit
Example:
switch(config-monitor)# exit
switch(config)#

Specifying the NAM IP Configuration and Enabling the Web Server

After you assign the NAM to a VDC and set up a SPAN session between the switch and the NAM, you
must go to the VDC for the NAM, set up the IP configuration for the NAM, and enable the web server.
You can enable the NAM to function as either an HTTP server or an HTTPS secure server, but not both
simultaneously. After you enable the web server, the NAM is functional.
Step 1
Use the Cisco NX-OS attach module slot_number processor number command to open a span session.
attach module slot_number processor 1
Example:
switch# attach module 3 processor 1
opening...
nam.localdomain login: root
Password:
Cisco Nexus 7000 Series Network Analysis Module (N7K-SM-NAM-K9) Console, 6.0
Copyright (c) 1999-2013 by Cisco Systems, Inc.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-46
no shutdown
exit
Chapter 10
Installing or Replacing Components
Purpose
Enters the global configuration
mode.
Creates a monitor session.
Specifies the switch IP address and
the interface used for traffic.
Specifies the NAM by its IP address
and port-channel number.
Specifies to not use a rate limit.
Starts the NAM.
Exits the monitor session.
OL-23069-07

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 7004Nexus 7009Nexus 7010Nexus 7018

Table of Contents