Show Snmp Groups - Cisco 300 Series Cli Manual

Network Management Protocol (SNMP) Commands
OL-32830-01 Command Line Interface Reference Guide
Default Configuration
If viewname is not specified, all views are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the configured SNMP views.
switchxxxxxx#
show snmp views
Name
----------------
Default
Default
DefaultSuper

45.9 show snmp groups

To display the configured SNMP groups, use the show snmp groups Privileged
EXEC mode command.
Syntax
show snmp groups [ groupname
Parameters
groupname—(Optional) Specifies the group name. (Length: 1–30 characters)
Default Configuration
Display all groups.
Command Mode
Privileged EXEC mode
OID Tree
----------------------
iso
snmpNotificationMIB
iso
]
Type
----------
Included
Excluded
Included
45
868