Show Ips Status - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ips status

To display the IP storage status, use the show ips status command.
Syntax Description
module slot
Defaults None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines None.
Examples The following example displays the IP storage status for all modules on the switch.
switch# show ips status
The following example displays the IP storage status for the module in slot 9.
switch# show ips status module 9
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show ips status [module slot]
Modification
This command was introduced.
Port 8/1 READY
Port 8/2 READY
Port 8/3 READY
Port 8/4 READY
Port 8/5 READY
Port 8/6 READY
Port 8/7 READY
Port 8/8 READY
Port 9/1 READY
Port 9/2 READY
Port 9/3 READY
Port 9/4 READY
Port 9/5 READY
Port 9/6 READY
Port 9/7 READY
Port 9/8 READY
Identifies the module in the specified slot.
Cisco MDS 9000 Family Command Reference
show ips status
22-157