Expressions And Basic Functions Of Operation Keys; Expressions Of Operation Keys; Basic Operations - Mitsubishi Electric F930GOT-BWD Operation Manual

Graphic Operation Terminal GOT-F900
1.3

Expressions and basic functions of operation keys

The operation keys are expressed as follows in the text.
The example of the screen display and key operation are described as an example of
F940GOT when there is no description.
1.3.1

Expressions of operation keys

1) Touch keys on the screen which are actuated when being touched by fingers are enclosed
with a frame.
USER SCREEN MODE , PROGRAM LIST
2) Cursor control keys to be pressed may be expressed as follows.
,
3) When a same key is pressed several times or a same operation is repeated, the following
expression may be used.
, MORE
4) When an arbitrary numeric within the range of 0 to 9 is to be entered, the following
expression may be used.
0 to 9
1.3.2

Basic operations

The common operations in the GOT are shown below.
a) [ SET CONDITION ]
SAMPLE COND.
START COND.
h) END COND.
5 6
0 1
e)
,
b)
END
7 8 9 - CLR
2 3 4 ENT
f) g)
a) Function display
The selected mode or function is displayed here.
b) END key
This key terminates the displayed function, and
returns to the previous screen.
c) CLR (clear) key
This key cancels the input of characters and
numerics.
c)
d) ENT (enter) key
d)
This key determines the input of alphabets and
numerics.
e) Ten-key pad
This pad allows to enter numerics.
f) - (minus) key
g) and (cursor control) keys
h) SET key
When this key is pressed after a character or
numeric has been entered, the keyboard is
displayed.
Introduction 1
1-4