Download  Print this page

Expressions And Basic Operations Of Operation Keys; Expressions Of Operation Keys; Basic Operations - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic operation terminal.
Hide thumbs

Advertisement

Graphic Operation Terminal F930GOT
1.4

Expressions and basic operations of operation keys

The operation keys are expressed as follows in the text.
1.4.1

Expressions of operation keys

1) Touch keys on the screen which are actuated when touched by fingers are enclosed with
rectangular frame.
SCREEN MODE , HPP MODE
2) Cursor control keys to be pressed may be expressed as follows.
,
3) When a same key is pressed several times or a same operation is repeated, the following
expression may be used.
4) When an arbitrary numeric within the range of 0 to 9 is to be entered, the following expres-
sion may be used.
0 to 9
1.4.2

Basic operations

The common operations in the GOT are shown below.
[DEVICE MONITOR]
DEV.
6
2
0
,
SET
ON
OFF
CLR
7
8
9
3
4
5
1
-
ENT
Function display
The selected mode or function is displayed
here.
END
END key
This key terminates the displayed function, and
returns to the previous screen.
CLR (clear) key
This key cancels the input of alphabets and
numerics.
ENT (enter) key
This key determines the input of alphabets and
numerics.
Ten-key pad
This pad allows to enter numerics.
- (minus) key
and
(cursor control) keys
SET key
When this key is pressed after an alphabet or
numeric has been entered, the keyboard is dis-
played.
Input display
This field displays a value input from keys.
Introduction 1
1-6

Advertisement

Table of Contents

   Also See for Mitsubishi Electric F930GOT-BWD-E

   Related Manuals for Mitsubishi Electric F930GOT-BWD-E

Comments to this Manuals

Symbols: 0
Latest comments: