Chapter 3 Garp/Gvrp Configuration Commands; Garp Configuration Commands; Display Garp Statistics - Huawei Quidway S2000 Series Command Manual

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches

Chapter 3 GARP/GVRP Configuration Commands

3.1 GARP Configuration Commands

3.1.1 display garp statistics

Syntax
display garp statistics [ interface interface_list ]
View
Any view
Parameter
interface_list: List of Ethernet port to be displayed, expressed as interface _list =
{ { interface_type interface_num | interface_name } [ to { interface_type interface_num
| interface_name } ] }&<1-10>. interface_type is interface type, interface_numis
interface number and interface_name is interface name. For their meanings and value
range, read command parameters description of "Port" in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using display garp statistics command, you can view the GARP statistics
information, including the number of received/sent packet and the number of
discarded packet by GVRP/GMRP etc.
Example
# Display the GARP statistics information on Ethernet port Ethernet0/1.
<Quidway> display garp statistics interface ethernet0/1
GARP statistics on port Ethernet0/1
Number Of GMRP Frames Received
Number Of GVRP Frames Received
Number Of GMRP Frames Transmitted
Number Of GVRP Frames Transmitted
Number Of Frames Discarded
The above information indicates that the numbers of GVRP/GMRP packets
received/sent and discarded on Ethernet0/1 are 0.
Chapter 3 GARP/GVRP Configuration Commands
: 0
: 0
: 0
: 0
: 0
3-1