Optional) Setting The Aging Time Of Dynamic Mac Address Entries; Disabling Mac Address Learning - Huawei Quidway S9300 Configuration Manual
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
6.3.4 (Optional) Setting the Aging Time of Dynamic MAC Address
Entries
Context
Do as follows on the S9300 where you need to configure the MAC address entries.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-address aging-time aging-time
The aging time of the dynamic MAC address entries is set.
By default, the aging time of dynamic MAC address entries is 300 seconds.
----End
6.3.5 Disabling MAC Address Learning
Context
Do as follows on the S9300.
Procedure
l
l
Issue 03 (2009-08-20)
Disabling MAC address learning in the interface view
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The interface view is displayed.
3.
Run:
mac-address learning disable
MAC address learning is disabled on the interface.
By default, MAC address learning is enabled on an interface.
Disabling MAC address learning in the VLAN view
1.
Run:
system-view
The system view is displayed.
2.
Run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 MAC Address Table Configuration
6-5
Advertisement
Table of Contents
