Set 7400D Options; Set 7400A And 7400B Options - Avaya MCC1 Installation And Upgrades

Set 7400D Options

Return to Task List
The following steps are an example of how to change the default setting of 9600 to the custom setting of
19200.
NOTE:
If the link is between a R10r and a CMS, set the 7400D to 19200. If the link is between
any other system and a CMS, leave the speed of the 7400D set at 9600.
1
From the HOME screen, press NEXT/NO until SET OPTIONS ? is displayed.
2
Press ENTER/YES to stay in the SET OPTIONS ? menu.
3
Press NEXT/NO until SET 9600 SPEED ? is displayed.
4
Press ENTER/YES when SET 9600 SPEED ? is displayed.
5
Press NEXT/NO when 9600 = ON ? is displayed.
6
Press ENTER/YES when 9600 -> OFF ? is displayed.
7
Press ENTER/YES when CONTINUE ? is displayed.
8
Press ENTER/YES when SET 19200 SPEED ? is displayed.
9
Press NEXT/NO when 19200 = OFF ? is displayed.
10
Press ENTER/YES when 19200 -> ON ? is displayed.
11
Press NEXT/NO when CONTINUE ? is displayed.
12
Press ENTER/YES when 19200 -> ON ? is displayed.
13
Press ENTER/YES when SAVE CHANGES ? is displayed.
NOTE:
The SET OPTIONS ? menu cannot be terminated if all speeds are set to off.
Return to Task List

Set 7400A and 7400B Options

Return to Task List
Determine if the 7400A or 7400B will be interfacing with D-lead modems or attention control modems.
Use Table 36 to interface with either modem. You can set options for the 7400B through a dumb terminal.
.
Table 36: Options for D-Lead and Attention Control Modems
Set Option Display
Set 300 Speed?
Set 1200 Speed?
SI Installation and Upgrades
June 2004
D-Lead
Option Settings
300 Note 1
1200 Note 1
Option Switch Settings
Task List: Data Module Switches and Options
Attention
Control Settings
Note 1
Note 1
1 of 2
745